# bblrc - Balloon Board Loader configuration file

# ports

# serial port for xmodem
PORT=/dev/ttyS0

# parallel port for Xilinx CPLD dongle
CPLDBASEADDR=378

# location of boot loader, kernel and root image
FILES=`pwd`

# location of the CPLD code
LOGICFILES=`pwd`

# app files for loading
# balloon2 setting
#BALLOON=2
#CPLD="20040427_dual_chip_compatible.xsvf"
#SMALLBOOT="bootldr.small"
#BOOTLOADER="bootldr.fast"
#KERNEL="zImage"
#ROOTFS="balloon-guralp.yaffs.gz"
# Bootloader Parameters
#BUILD="guralp"
#this is the right rune for 2.4.19 kernel
#LINUXARGS="nointrd root=/dev/mtdblock2 init=/linuxrc console=ttySA0"
#for kernels newer than 2.4.19 use this line (e.g 2.4.25 or 2.6)
#LINUXARGS="nointrd root=/dev/mtdblock1 init=/linuxrc console=ttySA0"

#balloon3 settings
BALLOON=3
CPLD="vhdl/cpld/l3cpld.xsvf"
FPGA="vhdl/fpga/l3fpga.bin"
SMALLBOOT="bootldr/bootldrpxa.small"
BOOTLOADER="bootldr/bootldrpxa.fast"
KERNEL="kernel/zImage"
INSTALLER="kernel/zImageInitrd"
#ROOTFS="rootfs/debian/balloon3-test-udev.yaffs2.gz"
# Bootloader Parameters
BUILD="E1"
LINUXARGS="nointrd root=/dev/mtdblock1 init=/sbin/init /quiet console=ttyS2,115200"


# Logging options for chat
#CHATOPTIONS="-v -s"     #Verbose logging to stderr
CHATOPTIONS=""           #no logging for when things seem to be working

# location of the chat binary
CHATBIN=/usr/sbin/chat

# file into which machine ID gets written
# also used, naughtily, as temporary processing place to figure out machine id
MACHINEIDFILE=$HOME/balloon-bin/machineid

# nice value for sx, so that it takes priority over busy web
# servers, web browsers, and so on running on the same machine
# negative values are higher priority, positive ones are lower
# note that we're using a local copy of nice because it's setuid root
# naughty but, erm, nice
#SXNICE="/home/balloon/bin/nice --adjustment=-1"
SXNICE=